Clik here to view.
vShield Manager - VXLAN status Not ready
In interface vShield Manager in category Network virtualization (Preparation) Status of network connectivity for VXLAN traffic - Not ready.Agent VXLAN was installed on host in automatic mode and for...
View Articlevshield 5.5.4 with IP hash
Hi I use vshield 5.5.4 with vcenter and esxi 6.x I have etherchannel on my switches and all works 100% correctly with normal portgroups however with vshield vmkernels and virtual wire portgroups, even...
View ArticleClik here to view.
VMware SRM and EMC recoverpoint
Hi Guy, Can VMware SRM integrated with EMC RecoverPoint replication for storage arrays provide zero RPO? it can work well with EMC RecoverPoint replication for storage arrays that can provide real time...
View ArticleClik here to view.
vShield Manager 5.5 OS type and CLI reference?
Hello there.I`m totally new to vShield, but I`ve noticed that vShield Manager CLI look like Cisco IOS CLI so much and I even could use not fully qualified commands like "ena". I`m curious what OS is...
View ArticleCan't enable VXLAN in VSM
I was trying to add a new pVDC in vCloud 5.5, and discovered that I need to have VXLAN configured to do so. I cannot get VXLAN it enable. I have manually downloaded and added the VIB onto my host, it...
View ArticleClik here to view.
Vshiels SNAT port translation
Hi I have requirement where i want to do one to one Source PAT, we have SAN box which can only send SNMP traps in port 162 but our SNMP host only listen to 1201, i want to configure SNAT on edge...
View ArticlevShield 5.5 - IP Address for the vShield Apps - same Network as the ESXi hosts?
I'm currently in the process of planning a vShield deployment. I have to give IP addresses to the vShield Apps but before I proceed there is one question - do the IP adresses of the vShield Apps (when...
View ArticleClik here to view.
Upgrading netx-SDK-2107100 to latest version
Hi , I am new to NETX-SDK.My product is using netx-SDK-2107100. Where can I find the latest netx-SDK and how can I upgrade it? Thanks,Kanika
View ArticleClik here to view.
Where is the VMCI Driver in Vmware tools ?
Hi, Starting vSphere 5.5, i can not find the "VMCI Driver" module from the vmtools installer, if i still use VCNS(Not NSX) for agentless virus protection solution(TrendMicro Deep Security for example),...
View ArticleClik here to view.
vCNS Edge GW Load Balancing issue
Hello everybody! I was faced with a strange behaviour of VMware Edge Gateway during configuring Load Balancing service.It's not balancing more than one host behind the many-to-one NAT. For example, I...
View ArticlevShield Edge "Applications"
Hello, I have been trying to figure out how to add applications to the "Known Applications" list when creating a rule. I have found the option in Home -> Inventory -> Networking, then selecting...
View ArticleVmware and promiscuous mode
Hi all Are there any open source firewall out there which does not require promiscuous mode to work within a HA failover cluster setup? I am working on a cloud platform and would like to setup a...
View ArticleHelp Getting a VM running RHEL 6 in an Isolated Network to Connect to Internet
I currently have an environment of about 5 VMs that are running RHEL 6, a domain controller, and one Windows 7 machine. They are running on an isolated network. What I am trying to do is to get one of...
View ArticleClik here to view.
ESXi Migration when vShield Manager is in use
Hi, Has anyone performed ESXi host migrations between vCenters when vShield manager is involved? The ESXi hosts are 5.1 u3 but will be 6.0 at a later when when they are migrated. Current vCenter - 5.1...
View ArticleClik here to view.
Vshield error : Not applicable to ESX version below 4.1 Patch 3
Dear Experts, We are using ESXi 6.0, Vcenter 5.5 and Vshield 5.5. Vcenter is already added to vshield manager While we login to vshield manager and try to install the vshield endpoint on the selected...
View ArticleClik here to view.
Change VLAN Id for VXLAN
Hi, We need to change the VLAN id for the VXLAN. Our system are:- vCloud Director 5.5.x- vCNS, vShield Manager 5.5.x- vCenter 5.5.x How do we proceed to change the VLAN Id to a new one for the VXLAN?...
View ArticleClik here to view.
Does anybody know if VCNS 5.5.4.3 compatibles with vSphere 6.0 U3 ?
Hello, The VMware Product Interoperability Matrices does not list anything about vSphere 6.0 U3. Any idea ? i need vShield for agentless antivirus. Thank you.
View ArticleClik here to view.
If I downgrade the vCloud suite 6.0 standard, Can I use the vCNS feature?
Hello.I received a question from the customer.If I downgrade the vCloud suite 6.0 to 5.X , Can I use the vCNS(vCloud Networking and Security) feature?I would appreciate it if you solve my inquiry. Many...
View ArticleClik here to view.
Unable to deploy VXLAN in vSphere 5.5 with vmknic error
Hello everyone, Over two weeks I've tried different ways to deploy VXLAN unsuccessfully. I follow the VXLAN deployment guide but I've always the same error message in ESXi hosts. XXX...
View ArticlevShield-edge# configure terminal
vShield-edge-17-0# configure terminal% Unknown command. wtf? Has the CLI become pointless between some releases or something? I'm quite certain I've done this before 5.5.4-2504419
View Article