Network Configuration?
Hi, Has anyone got the best VMware practise how to configure the network on a ESXi host when its connected to a HP C7000 enclosure using shared uplinks? Do we use IP Hash or Port ID? Network team will...
View ArticlevShield Manager 5.5 OS type and CLI reference?
Hello there.I`m totally new to vShield, but I`ve noticed that vShield Manager CLI look like Cisco IOS CLI so much and I even could use not fully qualified commands like "ena". I`m curious what OS is...
View ArticlevShield SSL VPN Plus AD authentication users
Hi! I try to configure VPN SSL plus with Active Directory user authentication . I have many user in a AD group. These user are those can access to VPN. When i try to configure "Login attribute Name"...
View ArticleCan't enable VXLAN in VSM
I was trying to add a new pVDC in vCloud 5.5, and discovered that I need to have VXLAN configured to do so. I cannot get VXLAN it enable. I have manually downloaded and added the VIB onto my host, it...
View ArticleVshiels SNAT port translation
Hi I have requirement where i want to do one to one Source PAT, we have SAN box which can only send SNMP traps in port 162 but our SNMP host only listen to 1201, i want to configure SNAT on edge...
View ArticleWhere is the VMCI Driver in Vmware tools ?
Hi, Starting vSphere 5.5, i can not find the "VMCI Driver" module from the vmtools installer, if i still use VCNS(Not NSX) for agentless virus protection solution(TrendMicro Deep Security for example),...
View ArticleUpgrading netx-SDK-2107100 to latest version
Hi , I am new to NETX-SDK.My product is using netx-SDK-2107100. Where can I find the latest netx-SDK and how can I upgrade it? Thanks,Kanika
View ArticlevShield Edge "Applications"
Hello, I have been trying to figure out how to add applications to the "Known Applications" list when creating a rule. I have found the option in Home -> Inventory -> Networking, then selecting...
View ArticleVmware and promiscuous mode
Hi all Are there any open source firewall out there which does not require promiscuous mode to work within a HA failover cluster setup? I am working on a cloud platform and would like to setup a...
View ArticleClik here to view.
Add new host to existing VXLAN cluster
Hello Everyone, I have a cluster containing 2 hosts that are prepared to use VXLAN. Now I want to add new hosts to the cluster but I don't know how the preparation steps because the cluster are already...
View ArticleHelp Getting a VM running RHEL 6 in an Isolated Network to Connect to Internet
I currently have an environment of about 5 VMs that are running RHEL 6, a domain controller, and one Windows 7 machine. They are running on an isolated network. What I am trying to do is to get one of...
View ArticleESXi Migration when vShield Manager is in use
Hi, Has anyone performed ESXi host migrations between vCenters when vShield manager is involved? The ESXi hosts are 5.1 u3 but will be 6.0 at a later when when they are migrated. Current vCenter - 5.1...
View ArticlevCNS Edge GW Load Balancing issue
Hello everybody! I was faced with a strange behaviour of VMware Edge Gateway during configuring Load Balancing service.It's not balancing more than one host behind the many-to-one NAT. For example, I...
View ArticleVshield error : Not applicable to ESX version below 4.1 Patch 3
Dear Experts, We are using ESXi 6.0, Vcenter 5.5 and Vshield 5.5. Vcenter is already added to vshield manager While we login to vshield manager and try to install the vshield endpoint on the selected...
View ArticleError preparing VXLAN in VCNS
Hi I've been trying to configure VXLAN in a VCNS for a VDS on a vCenter Cluster, but it didn´t work. I'll list the steps i made for help on troubleshooting: 1) I chose the target vCenter Data Center...
View ArticleChange VLAN Id for VXLAN
Hi, We need to change the VLAN id for the VXLAN. Our system are:- vCloud Director 5.5.x- vCNS, vShield Manager 5.5.x- vCenter 5.5.x How do we proceed to change the VLAN Id to a new one for the VXLAN?...
View ArticleClik here to view.
Does anybody know if VCNS 5.5.4.3 compatibles with vSphere 6.0 U3 ?
Hello, The VMware Product Interoperability Matrices does not list anything about vSphere 6.0 U3. Any idea ? i need vShield for agentless antivirus. Thank you.
View ArticleClik here to view.
If I downgrade the vCloud suite 6.0 standard, Can I use the vCNS feature?
Hello.I received a question from the customer.If I downgrade the vCloud suite 6.0 to 5.X , Can I use the vCNS(vCloud Networking and Security) feature?I would appreciate it if you solve my inquiry. Many...
View ArticleClik here to view.
Unable to filter mail using Fortimail Gateway
One of our client's email server hosted in a cloud platform. Now they need to access mail filter facility in Fortinet and so I did theses steps as below.Allow port for mail services in Cloud...
View ArticleClik here to view.
Port Mirroring
Hi, I would like to know whether I can configure a Port-Mirroring in vCloud. In fact, I would like to have a port-mirroring of a virtual machine to another virtual machine even when they are hosted in...
View Article